-->
S & M Engineering Services

Valid XHTML 1.0 Strict

S & M Engineering Services

S & M Engineering Services is a minority-owned consulting engineering business. It is owned by Mr. Donald Henry and Subijoy Dutta, a registered Professional Engineer (P.E.), who won the 1991 National Award for Individual Excellence in Environmental Restoration from the U.S. Air Force. In April 2004, S & M Engineering had its 20th anniversary marked by two decades of growth and success. Some nationally known professionals and engineers, such as Dr. Maurice Albertson, P.E., Dr. Kent T. Brakken, Dr. William E. Roper, P.E. and Mr. Dennis Haag are retained by the company as outside consultants.

The company's new website also was made with a new logo. Also, the page was made to be accessible to most browsers. The new logo can be downloaded as follows:

The Statement of Qualifications gives detailed information about some of the projects S & M Engineering has undertaken and how the business functions.

Statement of Qualifications

September 2004

S & M Engineering Services

1496 Harwell Ave., Crofton, Maryland 21114 USA

Phone: (410) 721-7706; FAX # (410) 721-6265; email: subijoy at msn dot com

Website : http://yamuna.sdutta.tripod.com/snmengineering.htm

Image 002

Other Offices:

Vizag, India

Attn: Mr. A.S. Narayana 0891-254-1945; 552-5869 (Res.)

Ph: (0891)-254-1945

Kolkata, India

Attn: Phalguni Bhattacharya

S & M Engineering Services (India) “SURJANIKETAN”,

Birati, Kolkata INDIA 700051

Ph: (033) 2514-1043; Fax:(033) 2512-4630

Image 004

▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄

TABLE OF CONTENTS

════════════════════════════════════════════════════════════════════════════════

SECTIONPAGE

1.0 INTRODUCTION 1

2.0 FIELDS OF EXPERTISE 2

3.0 SERVICES OFFERED 3

4.0 PROJECT EXPERIENCE SUMMARIES 4

5.0 BACKGROUND OF KEY PROFESSIONALS 7

1.0 INTRODUCTION

S & M Engineering Services is a minority-owned consulting engineering business. It is owned by Mr. Donald Henry and Subijoy Dutta, a registered Professional Engineer (P.E.), who won the 1991 National Award for Individual Excellence in Environmental Restoration from the U.S. Air Force. In April 2004, S & M Engineering will have its 20th anniversary marked by two decades of growth and success. Some nationally known professionals and engineers, such as Dr. Maurice Albertson, P.E., Dr. Kent T. Brakken, Dr. Donald E. Menzie, P.E. and Mr. Dennis Haag are retained by the company as outside consultants.

S & M Engineering provides technical expertise in all phases of environmental management, beginning from preliminary investigation to final cleanup in compliance with the locally applicable regulation. From studies, planning, remedial design to treatment, installation, and construction management is undertaken by our engineering consulting services. Any investigative drilling or water well completion etc. are mainly looked after by Petro Engineering Systems, a sister concern of S & M Engineering. Within each project phase S & M has developed the ability to adapt and use the most cost-effective and site-specific techniques available.

S & M Engineering Services is headquartered in Crofton, Maryland, USA, and has offices in eastern Oklahoma, California, and Texas. Our offices are staffed with top level professionals and field staff, including:

² Engineers

- Civil & Environmental

- Geological

- Chemical

- Mechanical

- Electrical & Computer Science

² Ecologists

² Soil Scientists

² Geologists

² Data Base Specialists

² Programmer Analyst

² Environmental Specialists

² Hydrogeologists

² Well Log Analyst

S & M Engineering's staff and associates has experience in environmental and ecological studies, including, permitting, design, and construction management. We have conducted many water use studies, estimating future needs including potential area growth projection, dating back to the early 1970s. The total staff strength of S & M varies projectwise since most people are on consultant basis.

2.0 FIELDS OF EXPERTISE

S & M Engineering Services has four senior level Registered Professional Engineers and two ecologists. Many different aspects of engineering, geology, and hydrogeology are looked after by these scientists and engineers as project leaders. The services covered by S & M Engineering and their respective project leaders are shown below:

Project Leader

v           HYDROLOGY STUDIES Mr. SUBIJOY DUTTA, P.E.*

v           ENVIRONMENTAL STUDIES

v           SITE/BUILDING PLANS

v           HVAC SYSTEM DESIGN

v           CONSTRUCTION MANAGEMENT /FUGITIVE DUST EMISSION CONTROL

v           WATER USE STUDIES

v           WASTEWATER TREATMENT PLANT

v           ENERGY & AIR EMISSION AUDITS

v           SEWER SYSTEM/LAGOON DESIGN

v           SURVEYING & SUBDIVISION

v           WASTEWATER TREATMENT SYSTEM Project Leader

INDUSTRIAL WASTEWATER TREATMENT Mr. SUBIJOY DUTTA, P.E (Removal of Heavy Metals & Organics) {* P.E. - Registered Professional Engineer}

v           REMEDIAL WETLAND SYSTEMS

v           AIR QUALITY MONITORING

v           AIR EMISSION CONTROL SYSTEM DESIGN

v                       ECOLOGICAL STUDIES

v           SOCIO-ECONOMIC STUDIES Project Leaders

v           BIODIVERSITY SURVEY Dr. KENT T. BRAKKEN &

v           ENVIRONMENTAL IMPACT STUDIES MS. AMY TOWNSEND

v           OZONE DEPLETION STUDY

v           RESERVOIR SIMULATION Project Leader

v           WATERFLOOD STUDIES Dr. DONALD E. MENZIE, P.E.

v           PETROPHYSICAL STUDIES

v           PHASE BEHAVIOR STUDY

3.0 SERVICES OFFERED

A partial listing of services offered are furnished in the following:

1. CONSULTING ENGINEERING SERVICES IN:

(a) Environmental Engineering

(b) Geological Engineering

(c) Mechanical Engineering

(d) Electrical Engineering

(e) Chemical Engineering

(f) Water and Wastewater Engineering

2. GROUNDWATER AND HYDROLOGY STUDY

3. WASTE WATER TREATMENT FACILITY DESIGN, MODIFICATION, & ONSTRUCTION

4. RECYCLING OF TOXIC AND HAZARDOUS WASTE

5. SOCIO-ECONOMIC STUDIES

6. REMEDIAL DESIGN OF HAZARDOUS WASTE SITE CLEANUP

7. AIR QUALITY ASSESSMENT AND WATER AND SOIL ANALYSIS

8. ENVIRONMENTAL SEMINAR/TRAINING

9. ABANDONED MINE LAND RECLAMATION

10. PREPARATION AND SUBMITTAL OF STATE & FEDERAL FORMS

11. EXPERT WITNESS TESTIMONY

12. WATER QUALITY MONITORING AND REPORTING

13. PETROLEUM STORAGE TANK BOTTOM COLLECTIONS AND RECYCLING

14. ECOLOGICAL STUDIES/MARINE BIOLOGY STUDIES

15. WATER USE STUDIES

16. AQUIFER PRODUCTIVITY STUDY

4.0 PROJECT EXPERIENCE SUMMARIES

A brief summary of expertise provided by the associates and consultants of S & M Engineering Services is presented below. Detailed information pertaining to specific needs may be readily obtained by request.

PROJECT NAME/DESCRIPTION

COST

REMARKS

Ø      Low-Cost Wastewater Treatment Plant at JNTU, Hyderabad

$50,000

Completed Construction on August 31, 2004

Ø      Development of a Scheme for a Pilot Municipal Solid Waste Management Plan for the Silchar Municipality, India

$ 5,200

2002-2003 Performed by S& M Engineering (India)

Ø      Watershed Analysis using remote sensing & Satellite Imagery for the Yamuna River Remediation Project, India

$ 15,000

2002-2003 Performed en-gratis for the Yamuna Foundation for Blue Water.

Ø      Air Emission Control and Removal of Nitroglycerine (NG) from Air Stream and Heavy Metals from Wastewater at the Navy Facility in Indian Head, Maryland

$200,000

1996-97 performed jointly with Tetrahedron, Inc.

Ø      PM (Particulate Matter) Emissions Control and alternatives to Surface and Underground Shaft mining of Coal

$245,000

1998-present : working with Coilwell, Inc. of Oklahoma in developing a hydraulic mining system by using a high pressure water-jet cutting system.

Ø      Seminar at MIT (Massachusetts Institute of Technology) on Engineered Barrier Systems

$5,000

2000 – presented by Subijoy Dutta covering Landfill cover systems, Slurry walls, and other Engineered barrier systems with special emphasis on site selection, design, construction, and monitoring aspects.

Ø      Yamuna river remediation project by use of constructed wetlands, New Delhi, India

$120,000

1994-present – Submitted preliminary designs to Delhi Jal Board for approval and funding. Expended S & M funds over $35,000 so far.

Ø      Boilers and Industrial Furnaces (BIF) emission Standards, Taiwan, Mexico.

$150,000

1993-1995 – provided standards and demonstrated technologies to meet the standards.

Ø      Site Specific Leach Test – Patented Method for Soil Cleanup Level

$60,000

1993-1997 – developed method and filed patent in US

Ø      Sunderban Tiger Survey, India

$25,000

1991-93 – Assisted in Tiger Survey – project lead : Amy Townsend

Ø      Hydrogeologic study, Oakwood E. Addition, Midwest City, Oklahoma

$25,000

1988 – Assisted a small community for expense reimbursement only.

Ø      Environmental Evaluation, Frontier State Bank, Oklahoma City

$2,500

1990 – Assessment of a small manufacturing facility

Ø      Water Use Study for Haskell County Water Co., Stigler, OK

$10,000

1991 - Small community help project

Ø      Water Use study, Atoka County RWD #4, Atoka, OK

$35,000

1987 – Expert Testimony in a case involving oilfield pollution of a drinking water reservoir.

Ø      Hydrogeologic Expert Testimony, Alfalfa County Rural Water District

$60,000

1987 - Expert Testimony in a case involving oilfield pollution of a drinking water reservoir.

Ø      Abandoned Mine Land Reclamation Design Project, Haskell County, Oklahoma

$250,000

1987-1989 – Eastern Oklahoma surface coal mine reclamation

Ø      Hydrogeological Investigation in Ponca City, Oklahoma

$55,000

1987-88 – Conducted an independent investigation for the State of Oklahoma for the most controversial groundwater pollution case in Southwest US at that time.

Ø      Environmental Technologies for Ecological Restoration Seminar/Training

$120,000

1995 – Conducted the seminar in Bowie, Maryland to address the needs of developing countries. Participants included scientists and engineers from India, Philippines, Thailand, and Bangladesh.

Ø      Plasma Energy Pyrolysis System for destruction of Medical Waste

$55,000

1997-98 – Conducted a feasibility study and made presentation of the technology (currently used in US)

Ø      Medical Waste Management Seminar

$2,500

1997 - Presented a seminar on medical waste management in Oklahoma

Ø      Environmental Assessment and Preliminary Designs and permitting of the Seventh Day Adventist Church in Maryland

$180,000

1993-1995 – Completed preliminary plans

S & M Engineering team consists of experts in engineering and environmental science. The engineers offer their expertise in a number of fields, including civil, geotechnical, geological, petroleum, and environmental areas. The social science and environmental aspects of S & M assure that projects are both culturally appropriate and environmentally sound. Most of S & M's team has advanced degrees. Many have won awards and honors, and some have contributed to their fields by writing articles and books. Through active participation in a variety of professional organizations, they keep themselves up with the leading edge technological developments in their fields.

5.0 SUMMARY OF A TYPICAL PROJECT IN INDIA

During August 2004, Subijoy Dutta of S & M Engineering visited the site and conducted the system inspection and testing prior to the initial startup of the Deep pond system on August 30, 2004. Delta Business Services, and along with contractors and their field persons completed the final piping, electrical, spillways, and all other ancilliary construction work to get the system ready for the startup.

To install the spillways at accurate levels another set of surveys were conducted by the site engineers.

The construction part of the project is practically completed. Some fine tuning and adjustments is being carried out during the 30-day build up of the anaerobic bacteria. At the present time the amount of work completed at the site compares to approximately 145% of the total construction work estimated in the original proposal.

For easy reference, the schematic diagram showing the Deep pond system as excavated at the JNTU site is also shown here on Figure 1 below:

Image 005

Image 007 Figure 2a, 2b, and 2c shows Pictures of the Deep Pond System as built (September 2004) below:

Image 009

Figure 2a S Dutta at the Sewage Level (Deep Pond) Figure 2b – Deep Pond (17 Ft.)

Image 011

Image 013

Figure 2c – Solarization Pond Figure 2d – Diffusers in the Aeration Pond

6.0 SUMMARY BACKGROUND OF KEY PROFESSIONALS:

Types of expertise range greatly within S & M Engineering as identified by the following spectrum of socio-economic, cultural, engineering, environmental, mining, and waste management projects conducted by the following key professionals.

Dr. Kent Brakken has worked as Project Manager for environmental permitting projects, including, surface, underground, and in-situ coal mines. He is responsible for managing projects involving coal, phosphates, hardrock mines, hazardous wastes, pipelines, milling and processing facilities, power plant siting evaluations, environmental compliance audits, and other resource development projects. He has prepared about 35 proposals involving lignite surface mining, deep coal mines, land application of sewer sludge, oil shale development, industrial waste disposal, power plant siting, federal regulatory programs, effluent treatments for mine reclamation projects, reclamation of abandoned mined lands, environmental audits, synfuel plant fly ash disposal, and similar other projects.

Subijoy Dutta, a registered Professional Engineer (P.E), provides overall direction to all technical projects of S & M Engineering. He has extensive experience in Remedial investigations, Feasibility studies (RI/FS), Remedial Design, and Remedial Actions (RD/RA) pertaining to the CERCLA regulations. He is the author of the book “Environmental Treatment Technologies for Hazardous and Medical Wastes - Remedial Scope and Efficacy” published by Tata McGraw Hill in March 2002. Summary of the book is furnished under Appendix I at the end. He has been the Remedial Project Manager (RPM) for several superfund and RCRA sites. He has designed and supervised construction of several landfill cover systems. He was instrumental in the cleanup of three radioactive waste disposal sites at Tinker Air Force Base in Oklahoma. He played a key role beginning from the initial investigation, conducting dosimetric survey, to final cleanup of these three radioactive waste disposal sites. He has also designed the ground water treatment plant for TCE and Cr6+ removal for a superfund site in Oklahoma. He initiated the Yamuna river remediation effort in New Delhi, India, by use of constructed wetlands. Hydrogeological investigation of the Ponca City pollution problem, and watershed analysis for investigating the severe erosion problem in Midwest City, Oklahoma, are a few examples of his community projects. He has given various environmental seminars and has over 20 publications.

Dr. Hilary Inyang is one of the top ten geotechnical engineers in US and author of the book “Geoenvironmental Engineering”, which was just released by the pennwell Publishing Company. This new book (retail price US $150.00) is going to be used as a text book in many environmental engineering curriculum in US and overseas from the next Fall 2000 session.

Dr. Donald Menzie has worked as an engineer for over 40 years. His expertise in Petroleum and natural gas have been applied to numerous projects. His past projects involving projects for such companies as Conoco, Mobil, and Texaco have benefitted him with a wealth of knowledge that he brings to S & M.

Dr. Amy Townsend researches and writes on cultural and environmental sustainability, intellectual property rights, and management of commons and protected areas. The impacts of coastal and marine tourism, and developments on human populations and the environment including the global environmental change are also her major areas of focus. She has contributed to two United Nations reports, and studied land-based sources of marine pollution in the wider Caribbean. She has also participated in the committee for the National Institute on the Environment's work on the environmental effects of stratospheric ozone depletion, and investigated methods for environmentally sound and culturally appropriate community and building design. Ms. Townsend has numerous publications.

Bryan Watt's experience comes from over 12 years in regulatory and ground water related work involving coal mine permitting, engineering, and field work since 1975.

S & M's team provides a wealth of knowledge and experience in projects involving engineering, cultural, and environmental issues. A detail qualification and expertise of the key S & M engineering professionals can be furnished upon request.

Back to Top

Appendix I

BOOK 1

Environmental Treatment Technologies for Hazardous and Medical Wastes:  Remedial Scope and Efficacy

ISBN No.  0-07-043586-3, Tata McGraw Hill Publishing Co.   Mar. 2002

Description

Many well-intentioned land development projects are conceived, planned, and carried to completion in an inadequate environmental context.  The unintended consequences of such projects often include contamination and degradation of streams, forests, soils, and entire natural systems. Dealing with the challenges of maintaining a decent balance between man’s needs and a sustainable environment has become the province of specialized professionals and technicians trained and equipped to address the complexities of environmental contamination.

Environmental Treatment Technologies for Hazardous and Medical Wastes provides a systematic framework for analyzing the full range of outcomes that may result from many of the components of urban development and for remediating their adverse effects.  The book also provides details on various waste treatment technologies for hazardous and medical wastes.

Environmental Treatment
Technologies for Hazardous and Medical Wastes:  Remedial Scope
and Efficacy

It includes:

The book also includes a description of the technology, flow diagram and other technology specific information. With this coverage the book would be useful for the environmental scientists and engineers, scientists at the Pollution Control Boards, NGO’s , hospitals and medical organizations and students of environmental engineering and sciences.

Red Band:

Foreword by Prof. Dorn C. McGrath, Jr., AICP, Director of Institute for Urban Environmental Research, The George Washington University

Flap I:

Contents include:

  1. Introduction

  2. Synopsis of Hazardous and Medical Waste Identification and Characterization

  3. General Site Cleanup Process

  4. Environmental Treatment Technologies for Hazardous

  5. Containment Technologies

  6. Soil Washing

  7. Thermal Treatment

  8. Vapor Extraction

  9. Bioremediation

  10. Incineration Treatment

  11. Other Physical/Chemical Treatments

  12. Remediation Case Studies

  13. Monitoring and Control Technologies

  14. Alternative Treatment Technology Options for Medical Wastes

Flap II:

Image 005 Author’s Profile + photograph 

Mr. Subijoy Dutta is a registered professional engineer (P.E.) in Maryland, USA.  He has authored this book in March 2002, published by Tata McGraw Hill Company.  Mr. Dutta has over 18 years of experience in Remedial Investigations, Feasibility Studies (RI/FS), Remedial Design, and Remedial Actions (RD/RA) pertaining to the RCRA and CERCLA regulations.  He also provides expertise in the treatment, storage and disposal aspects of medical waste.  He has designed modified cover systems for Landfills and have supervised installation of Landfill covers for several hazardous waste sites.  Currently he is on a detail to the Center for Urban Environmental Research (CUER) at the George Washington University in Washington, DC.

Mr. Dutta has more than 30 publications in major technical journals.  He also has two equipment patents pending. He has received the 1991 National Award for Individual Excellence in Environmental Restoration from the U.S. Air Force chief of Staff General Merrill A. McPeak in Washington D.C. on April 20, 1992.  He has received the Unsung Hero Award in 1997 from the EPA Administrator, Carol Browner for his voluntary work towards the cleanup of the highly polluted Yamuna river in New Delhi, India.



Text Box: For ordering the book either: 1. Write to: S & M Engineering, 1496 Harwell Ave., Crofton, MD 21114 USA; Ph: 410-721-7706/Fax:410-721-6265 OR 2. go to www.tatamcgrawhill.com search for author name :subijoy
Image 008

Back to Top

BOOK 2

Sustainable Mining Practice: A global perspective

Sustainable Mining Practice: A global perspective ISBN 90-5809-689-0, Printed in Great Britain, July 2005

This book considers developments in sustainable mining practices all over the world during the past twenty five years. It addresses issues such as managing mining waste, mine closure, the environmental impacts of mining, land use planning and energy use management. It provides detailed coverage of successful sustainable mining systems and technologies, as practiced in large-scale operations in the U.S., Europe and Australia, as well as practices being developed in developing countries, such as India for controlling small-scale mining operations. The concluding chapter of the book presents case histories of sustainable mining practices from the Americas, Asia (with emphasis on India), Australia, Africa (Tanzania and Zambia), and Europe.  The primary audience for this book is Mine safety and environment personnel, Mine and Reclamation planners, practicing mining engineers, and environmental managers in mining companies.  This book will also be of interest to consulting engineers and scientists, as well as college students, regulatory/governmental agencies and their permitting and operations personnel.  It contains a wealth of information on cleaner production and how to minimize the environmental impacts of mining.

About the authors:

Dr. Vasudevan Rajaram, P.E. is a licensed professional engineer, a certified professional geologist, and an attorney with over 30 years of experience in mining and environmental fields. He is currently at BUrns and McDonalds in Chicago, Illinois. His experience covers a wide range of projects in the United States, Canada and India.

Mr. Subijoy Dutta, P.E. is a registered professional engineer with over 15 years of experience in Environmental Management of Hazardous, solid and medical Wastes. He has also authored a book on Environmental Treatment Technologies for Hazardous and Medical Wastes:Remedial Scope and Efficacy, published by Tata McGraw Hill Publishing Co. in March. 2002 His expertise includes the treatment, storage and disposal aspects of solid, hazardous, and medical waste; disposal system design for mining waste, municipal solid waste, and hazardous waste.  He has designed and completed installation of an unique wastewater treatment (Reuse)  system  in Hyderabad India in September 2004.

Dr. Krishna Parameswaran, P.E. is a licensed professional engineer in Pennsylvania. He is currently Director of Environmental Services – Operations and Compliance Assurance in Asarco’s Environmental Affairs Department. Dr Parameswaran’s interests include sustainable development in relation to mining, recycling of metals, and energy use in metals production, life cycle energy use and life cycle assessments of products.

Contents:

Back to Top